> BACK TO PREVIOUS PAGE
STANDARD MACHINE SPECIFICATIONS
BACKWORKING ATTACHMENT SPECIFICATIONS
STANDARD ACCESSORIES AND FUNCTIONS
OPTIONAL ACCESSORIES AND FUNCTIONS
EXTERNAL DIMENSIONS AND FLOOR SPACE

Standard Machine Specifications

ItemSpecifications
Max. machining diameter ø20mm(25/32in)
Max. headstock strokeStardard205mm(8in)
Tool Shank12mmX100~135mm.
12.7mmX100~135mm
4-Spindle sleeve holderNumber of toolsFront 4 tools : OP
Rear 4 tools : OP
Max. drilling capacityø10mm(25/64in)
Max. tapping capacityM8XP1.25
Max. die cutting capacityM8XP1.25
Power driven att.Number of tools 3~10 tools : including OP
Max. drilling capacityø8mm(5/16in)
Max. tapping capacityM6XP1.0
Max. milling capacityø10mm(25/64in)
Max. slotting capacity1.5mm(W)X4mm(D)
Main spindle min. indexing degree0.01º (C-axis control)
Rapid feed rate35m/min(X, Y, Z, XB, ZB)
198,000º/min(c)
Main spindle speedMax. 10,000min-1
Main spindle motor2.2kw(continuous)/3.7kw(15min.)
2-spindle front sleeve holderNumber of tools (sleeve)2 tools
Max. drilling capacityø8mm(5/16in)
Max. depth of hole100mm(3-15/16in)
Power-driven att. spindle speedMax. 8,000min-1
Power-driven att. drive motorAC servo motor 1.2kw
Coolant tank capacity170 l
Dimensions (WXDXH)2.200X1.200X1,700mm
Weight2.200kg
Power consumption8.0KVA
> BACK TO TOP

Backworking Attachment Specifications

Item Specifications
Max. chucking diameter ø20mm(25/32in)
Max. length for front ejection 80mm(3-5/32in)
Max. parts projection length 30mm(1-3/16in)
Back 4-Spindle unit Number of tools 4 tools : OP
Max. drilling capacity Stationary tool ø8mm(5/16in)
Power driven tool ø5mm(3/16in)
Max. tapping capacity Stationary tool M8XP1.25
Power driven tool M4XPO.7
Sub spindle min. indexing angle 0.01º (C-axis control)/15º : OP
Sub spindle speed Max. 8,000min-1
Sub spindle motor 1.5kw(continuous)/2.2kw(15min.)
Note)
The machining capabilities apply to SUS303 material.
The machining capacities may differ from listed values depending on the machining conditions, such as the material to be machined or the tools to be used.
> BACK TO TOP
STANDARD ACCESSORIES AND FUNCTIONS
Pneumatic unit
Automatic centralized lubrication unit
C-Axis control (Main spindle/Sub spindle)
Revolving guide bush unit
Drive system for power-driven attachment (including the 3 tools for cross-milling unit)
Back 4-Spindle unit
Short circuit breaker
Sub spindle air blow unit
Parts ejection detector
Work light
Coolant level detector (lower limit)
Door interlock unit
Spindle clamp unit (Main/Sub spindle)
6-station tool holder
4-Spindle sleeve holder
2-Spindle front sleeve holder (for Deep hole)
Sub spindle air purge
Air purge for revolving guide bush
Broken cutoff tool detector
Main collet
Sub collet
Drive system for power-driven attachment B
Automatic barfeeder interface
> BACK TO TOP
OPTIONAL ACCESSORIES AND FUNCTIONS
Tool setter
Stationary guide bush unit
Stationary guide bush sleeve
Rotary magic guide bush unit
Parts ejector (Air cylinder type)
Parts separator unit A
Parts ejector with guide tube
Sub spindle 15º indexing unit
Parts conveyor
Coolant unit 1.5MPa
Coolant unit 6.9MPa
Broken drill detector
Coolant flow detector
3-spindle front drilling unit
2-spindle counter-face drilling unit
Slotting unit
> BACK TO TOP
EXTERNAL DIMENSIONS AND FLOOR SPACE
 

Design features, specifications and technical execution are subject to change without prior notice.

This product is an export control item subject to the foreign exchange and foreign trade laws. Thus, before exporting this product, or taking it overseas, contact your STAR MICRONICS dealer.

> BACK TO TOP